IRB 6660-205/1.9

IRB 6660 for pre machining

The IRB 6660 for pre machining is the first robot on the market that is dedicated to pre-machining applications in the Foundry industry. 

This new robot is designed for high-performance applications where robot stability is a key factor for success. 

This version has a payload of 205kg and 1.93m reach.

Optimised for finishing and pre-machining applications

Based on requirements from machining operations.

For applications such as finishing, milling, grinding, cutting & sawing.

High productivity

Improve material removal rate.

Shorter cycle time.

High accuracy

Stiff, compact & robust design to withstand high process forces.

Parallel arm structure gives stiffness

Main Applications

Machine tending

Press tending

Milling

Cutting

Grinding

Sawing

IRB 6660FX

Fast and flexible transfer solution for medium size parts

The IRB 6660FX has a payload of 40Kg and a 3.10 + 1.40m reach.

Linear part transfer

By integrating a dual action unit into the IRB 6660, ABB creates the IRB 6660FX, a 7-axis robot for the transfer of medium size parts rapidly along a linear path. As a result, vibrations created when parts are rotated 180° by the conventional 6-axis robot are eliminated. In the case of new press lines, inter-press distance can be reduced as parts are transferred without having to be rotated.

Dynamic model control

The IRB 6660FX is also equipped with integrated dynamic model control to ensure that all seven axes are coordinated and operating at optimum speed and lifetime.

User-friendly programming interface

The IRB 6660FX is programmed the same way as its 6-axis counterpart is. Additionally, it can be programmed using ABB’s StampWare.

StampWare

Stamp-Ware is a family of controller software designed to make you more productive by minimizing the learning time and setup time of new production. The modularized program structure, the program wizard and the graphical production window decrease the time for training that the operator and robot programmer need. As a result, production is more efficient during installation, production set-up and optimizing of the robot cycle.

IRB 6700-150

The ABB IRB 6700-150 is a 6--axis industrial robot that has a 3.20m reach.

The IRB 6700 is more robust than its predecessor and maintenance has been simplified, making it the highest performing robot for the lowest total cost of ownership in the 150-300 kg class.

Built around LeanID

Every robot in the 6700 family has been designed to accommodate LeanID—a new Integrated Dressing (ID) solution meant to achieve a balance between cost and durability by integrating the most exposed parts of the dress pack into the robot. Equipping an IRB 6700 with LeanID makes it easier to program and simulate with predictable cable movements, creates a more compact footprint, and lengthens service intervals due to lessened wear and tear.

An IRB 6700-150 without LeanID has payload of 150Kg and with LeanID has 145kg payload.

It comes equipped with an IR C5 controller. 

The body comes in a standard IP67 protection rating.

Features and benefits

Increased service intervals and decreased service times

Longer uptime—mean time between failures 400,000 hours

Available with Lean ID for cost effectively increasing dress pack lifetimes

More robust with a rigid structure and a new generation of motors and compact gearboxes

Increased speed and shorter cycle times—on average 5 percent faster

Improved accuracy and higher payloads

Built to operate in the harshest environments—available with Foundry Plus 2 package

15 percent lower power consumption

IRB 6700-155

The ABB IRB 6700-155 is a 6--axis industrial robot that has a 2.85m reach.

The IRB 6700 is more robust than its predecessor and maintenance has been simplified, making it the highest performing robot for the lowest total cost of ownership in the 150-300 kg class.

Built around LeanID

Every robot in the 6700 family has been designed to accommodate LeanID—a new Integrated Dressing (ID) solution meant to achieve a balance between cost and durability by integrating the most exposed parts of the dress pack into the robot. Equipping an IRB 6700 with LeanID makes it easier to program and simulate with predictable cable movements, creates a more compact footprint, and lengthens service intervals due to lessened wear and tear.

An IRB 6700-155 without LeanID has payload of 155Kg and with LeanID has 140kg payload.

It comes equipped with an IR C5 controller. 

The body comes in a standard IP67 protection rating.

Features and benefits

Increased service intervals and decreased service times

Longer uptime—mean time between failures 400,000 hours

Available with Lean ID for cost effectively increasing dress pack lifetimes

More robust with a rigid structure and a new generation of motors and compact gearboxes

Increased speed and shorter cycle times—on average 5 percent faster

Improved accuracy and higher payloads

Built to operate in the harshest environments—available with Foundry Plus 2 package

15 percent lower power consumption